 Model Number |
MIG-200 IGBT |
Characteristic:
●IGBT inverter technology,current-mode control,reliable quality,stable performance.
●Closed loop feedback control,constant voltage output,fit for wide voltage range(±15%)
●Controlled by electronic reactor,stable welding performance,little splash,deep penetration,good welding bead.
●Slow wire feeding during arc starting,remove the tip ball after welding,easy arc-starting.
●Suitable for steel board with a thickness of more than 0.8mm.
●Small size.light weight.easy operation,economical and practical,Stable welding can be realized at the current of 30A when using welding wire a adiameter of 0.6mm;Can be widely used in automoblie,steel door & window,furniture and other industry.Cost-saving,can completely replace welder with taps.
 |
MIG-200 |
| Frequency input Power voltage(V/Hz) |
AC380V±15%
50/60
|
| Rate input power capacity(KVA) |
9.2 |
| Input current(A) |
14 |
| Rated output current(A) |
200 |
| Rated output voltage(V) |
24 |
| Output current range(A) |
50-250 |
| Output voltage range(V) |
15-26 |
| Duty cycle(%) |
60 |
| Efficiency(%) |
85 |
| Power factor |
0.85 |
| Insulation class |
F |
| Protection class of case |
IP23 |
| Wire feed speed(m/min) |
2-15 |
| Diameter of coil(mm) |
270 |
| Diameter of wire(mm) |
0.8-1.0 |
| Weight (kg) |
26.5 |
| Dimensions (mm) |
500×273×440 |
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page